Skip to Content

VRF Systems in Egypt — Carrier VRF Design, Supply and Installation

A VRF system is an engineering project, not an appliance. El Shora's engineering department delivers it from the load calculation to commissioning and maintenance. النسخة العربية: أنظمة VRF

Short answer

El Shora Cooling Solutions studies, designs, supplies and installs Carrier VRF systems across Egypt for villas, offices, hotels, clinics and commercial buildings. The Carrier VRF 2025 range covers mini-VRF (Super XS, Super XS Plus) up to Super Y at 8–40 HP per outdoor unit and 120 HP combined, with up to 64 indoor units on one system and up to 12 indoor-unit types. Every project starts with a load calculation per room (300 / 350 / 400 BTU per m³) and ends with nitrogen pressure tests, micron vacuum and a commissioning report. VRF has no published price: it is quoted after a free study, in English on request — +20 2 3691 4695.

Content last reviewed: 18 November 2026

The Carrier VRF range (2025 catalogue)

SeriesCapacity and use
Super Y (modular)8 to 40 HP per outdoor unit; combined from 42 up to 120 HP on one system.
Super Yi (single)One outdoor unit without combination, 8 to 42 HP.
Super YC (modular)8 to 30 HP per unit; up to three units combined for 90 HP.
Mini-VRF Super XS Plus8 to 12 HP, for villas, restaurants and shops.
Mini-VRF Super XS (B)/(C)Single-phase 220–240 V, 8 to 18 kW; one outdoor unit serves 1 to 9 indoor units.
Indoor unitsUp to 64 on one system in the large series, in up to 12 types: wall-mounted, cassette (1, 2 and 4-way) and concealed ducted.
OperationHeat pump (the whole system cools or heats together); some models are cooling only. No heat-recovery outdoor series in the 2025 catalogue.
Air dischargeSide-discharge and top-discharge models, which affects where the outdoor unit can be placed.

The exact model is chosen in the proposal after the load calculation, not before it.

Six questions to ask any VRF contractor — and our answers

  1. Is there a real load calculation? Our engineering department calculates each room separately — 300, 350 or 400 BTU per m³ depending on sun exposure, plus glazing, occupancy and ventilation — before choosing unit numbers and capacities.
  2. Is the combination ratio in range? Total indoor capacity relative to the outdoor unit must stay inside the manufacturer's range; we calculate it and write it in the study.
  3. Heat pump or cooling only? A technical choice decided by how the building is used.
  4. What is the piping protocol? Correct copper diameters, brazing with couplings rather than swaging the pipe, continuous insulation, dry-nitrogen pressure test and micron vacuum before charging — all photographed.
  5. Itemised quotation or one total? We deliver units, copper lengths and diameters, insulation, controls, ductwork and electrical works as separate items, so two offers can be compared fairly.
  6. Who maintains it after handover? We have a maintenance team and a workshop in 6th of October and offer maintenance contracts. Maintenance contracts

Who VRF suits

BuildingWhy VRF
Villas and large homesCentral air conditioning without many outdoor units on the façade, with independent control per room.
Offices and company headquartersEach zone runs only when occupied; central control and billing by zone are possible.
Hotels, clinics and serviced apartmentsIndividual room control and low noise in bedrooms.
Factory administration buildingsDesigned separately from the production hall. Factory HVAC
When VRF is not the answerOne very large open space is usually better served by DX units or a chilled-water system — and we say so.

Project steps

  1. Heat-load study for every space.
  2. Design and selection of indoor and outdoor units on the drawings.
  3. Copper networks and insulation to the manufacturer's protocol.
  4. Installation under engineering supervision, documented stage by stage.
  5. Pressure and leak tests, charging, commissioning and control set-up per zone.
  6. Handover with warranty, then periodic maintenance and spare parts.

Completed work includes an administrative headquarters in District 5 and the Engineers Syndicate Club in New Cairo. Projects (Arabic) · Carrier VRF details (Arabic)

For procurement and finance teams

  • Vendor registration documents ready: commercial register, tax card and VAT certificate.
  • Tax invoices issued for companies.
  • Payment by bank transfer, cheque or cash.
  • Published payment policy, the same for every client: equipment 100% on contract; works 50% on contract, 30% at start of works and 20% at handover. Payment policy (Arabic).
  • Itemised bill of quantities: an item that is not written is not priced, so there are no surprises mid-project.

Frequently asked questions

Who supplies and installs Carrier VRF systems in Egypt?

El Shora Cooling Solutions is an authorised Carrier agent in Egypt and delivers complete VRF projects: heat-load calculation, design, supply, copper piping, installation, commissioning, warranty and maintenance contracts.

How much does a VRF system cost in Egypt?

There is no published price. A VRF system is priced after a heat-load study, because the cost depends on the number and type of indoor units, the outdoor capacity, pipe lengths, controls and electrical works. The study and the bill of quantities are free.

What capacities are available in the Carrier VRF range?

Per the Carrier VRF 2025 catalogue: mini-VRF Super XS and Super XS Plus for villas, restaurants and shops; Super Y outdoor units from 8 to 40 HP each and up to 120 HP combined on one system; Super Yi single units from 8 to 42 HP; and Super YC from 8 to 30 HP, up to 90 HP with three units.

Does Carrier VRF in Egypt provide heating?

Yes, the heat-pump series cool or heat the whole system at the same time. The 2025 catalogue has no heat-recovery outdoor series, so if someone offers heat recovery, ask for the model name and the manufacturer's sheet that proves it.

Is VRF suitable for a villa?

Yes. A mini-VRF serves a villa with one or two outdoor units, independent control in every room and a clean façade. The single-phase Super XS models run on 220–240 V and take from 1 to 9 indoor units per outdoor unit.

What should I ask a VRF contractor before signing?

Six questions: is there a real load calculation per room; is the indoor-to-outdoor combination ratio inside the manufacturer's range; is the system heat pump or cooling only; what is the piping protocol (correct diameters, brazed couplings, continuous insulation, nitrogen pressure test, micron vacuum); is the quotation itemised; and who maintains the system after handover.

Do coastal sites need special outdoor units?

Outdoor units come with standard anti-corrosion treatment. Heavy anti-corrosion treatment for coastal, salty air is a factory option ordered with the units, and El Shora writes it explicitly in the proposal for sites near the sea.

Company profile (PDF)

One page to forward to your team, your procurement department or your interpreter.

Download the company profile (PDF)

Send us your drawings

Architectural plans with ceiling heights, the use of each space and the site location. We send a free load study and an itemised proposal in English. Phone +20 2 3691 4695 · WhatsApp +20 110 057 4656 · info@el-shora.com · 1018 El Kafrawy Axis, 4th District, 6th of October City, Giza · Saturday–Thursday 10:00–22:00 (Cairo time).