Skip to Content
Midea Xtreme Pro 2.25 HP Cool & Heat Split AC

Midea Xtreme Pro 2.25 HP Cool & Heat Split AC

(0 review)

Looking for the Midea Xtreme Pro 2.25 HP Cool & Heat Split AC? This is model M1SEFT-18HRN8F-Q8 from the Xtreme Pro series: 18,000 BTU (2.25 HP), cool & heat, with a fixed-speed compressor, on R32, at EGP 33,389 for the unit including delivery. El Shora is the authorized Midea dealer, with our base and warehouse in 6th of October.

See all Midea 2.25 HP models, prices and series differences on one page: Midea 2.25 HP air conditioners.

🧊 Refrigerant: R32 – the newest generation of refrigerant: higher cooling efficiency, lower power consumption and lower environmental impact. Learn the difference between R32 and R410A.

Midea Xtreme Pro 2.25 HP Cool & Heat Split AC – technical data

BrandMidea
SeriesXtreme Pro
Model codeM1SEFT-18HRN8F-Q8
Unit typeWall-mounted split
Nominal capacity2.25 HP ≈ 18,000 BTU/hr
Approximate area16 – 21 m² at 2.8 m ceiling
Operating modeCool & heat (heat pump)
CompressorFixed speed
RefrigerantR32
Power supplySingle-phase / 220 V
Copper sizesPer the manufacturer catalogue, confirmed on the site survey
WarrantyAuthorized dealer warranty — duration and terms are stated in the warranty certificate and the quotation
Price (delivery only)EGP 33,389 – updated 12 September 2026

Table data comes from our company records and approved engineering reference; pipe sizes are confirmed from the model catalogue before work. Published pipe tables are at the pipe size page.

How to read the code M1SEFT-18HRN8F-Q8

The code is not random; reading it lets you make sure you are comparing the same model at any seller (per the brand's Egyptian models):

  • M1S = the Midea Egypt wall-split prefix
  • HR = heat & cool
  • 18 = cooling capacity in thousands of BTU (18,000 BTU/hr ≈ 2.25 HP)
  • N = fixed-speed compressor

The right space for 2.25 HP

Using our approved heat-load method (length × width × height × a factor of 300 / 350 / 400 BTU/m³ depending on exposure), this capacity covers 16 to 21 m² at a 2.8 m ceiling. Used in small halls, living rooms, large bedrooms and offices. The classic mistake at this size is calculating on the room's dimensions when it actually opens onto another space. Large glazing, a kitchen and the number of occupants raise the load, so confirm with a real calculation: how engineers pick the right AC capacity · what HP and BTU mean · the AC calculator.

What makes the difference in operation

This model is cool & heat, so in winter it reverses the cycle and moves heat from outside in rather than generating it like a heater. That is why it draws far less power for the same feeling of warmth.

Fixed-speed compressor: it runs at full capacity and stops when the set temperature is reached. It costs less than the inverter at the same capacity and is simpler to service, but consumption is higher if the unit runs many hours a day.

The Midea Xtreme Pro series

Midea Xtreme Pro: fixed-speed on R32 and built to carry the high load of the Egyptian summer. The gap to Mission Pro is small in price and large if the room stores daytime heat. Our range has 6 models in this series from 1.5 to 3 HP, and this model sits mid-range in the series. All models are in the Xtreme Pro category · all Midea prices.

When to choose it

You would choose this model when you want winter heating from the same unit without a separate heater. And the space is 16 to 21 m² with an external wall close by for the pipe route. If either of those does not apply to you, look at the alternatives in the table below before paying.

Why pay more? M1SEFT-18HRN8F-Q8 compared

Instead of comparing across websites, here are all the close alternatives we stock in one table at today's prices: the other mode, the other compressor, the other brand, and the higher and lower capacities in the same series.

ComparisonModelPrice (EGP)vs M1SEFT-18HRN8F-Q8
Same model, cool onlyM1SEFT-18CRN8F-Q830,357−EGP 3,032 (9%)
Inverter versionM1SEFT-18HRDN8F-Q8 (AI Eco Master)37,764+EGP 4,376 (13%)
Carrier equivalent53QHEFT18N8-708F (X-Cool New)35,819+EGP 2,430 (7%)
Same series, 1.5 HP cool onlyM1SEFT-12CRN8F-Q819,200−EGP 14,189 (42%)
Same series, 1.5 HP cool & heatM1SEFT-12HRN8F-Q822,012−EGP 11,377 (34%)
Same series, 2.25 HP cool onlyM1SEFT-18CRN8F-Q830,357−EGP 3,032 (9%)
Same series, 3 HP cool onlyM1SEFT-24CRN8F-Q841,500+EGP 8,111 (24%)

The cheapest Midea 2.25 HP wall-mounted split in our range is M1SEFT-18CRN8F-Q8 at EGP 30,357; this model costs EGP 3,032 more for heating.

Price against capacity

A simple measure that compares prices fairly: divide the unit price by its rated capacity. M1SEFT-18HRN8F-Q8 costs EGP 33,389 for 18,000 BTU, which means 1,855 EGP per 1,000 BTU.

This modelEGP 1,855 per 1,000 BTU
Average across our wall-mounted split range (36 models)EGP 2,023
Cheapest model of the same typeEGP 1,600
Most expensive model of the same typeEGP 2,652

This model is among the better value in its type with us: its cost per unit of cooling is 8% below average, ranking 14 of 36 from cheapest to most expensive per BTU.

How we carry out the installation

With a wall split, the position of both units affects cooling more than anything else: the indoor unit facing the length of the room rather than a closed corner, the outdoor unit in open air away from sun reflected off a facing wall, and the shortest practical pipe run between them.

We work to approved specifications and fixed steps, not improvisation: South African or Swedish copper in the right sizes, full Armaflex insulation on both lines, a dry-nitrogen pressure test then a micron vacuum before charging, a correct drain slope that prevents dripping, and photo documentation of every stage on our system. Details in AC installation · AC maintenance.

The unit price includes delivery only within our service areas; installation, commissioning, warranty activation and after-sales service are a separate paid service, written clearly in the quotation together with any extra pipe length, preparation, chasing or scaffolding the site needs. 🎁 Limited-time offer: standard installation is free for wall-mounted units (Carrier and Midea) in 6th of October, Sheikh Zayed, Hadayek October and Hadayek Al-Ahram until 31 December 2026 — offer details.

From our real installations

Photos from El Shora's work on the same type of unit; they show the installation standard you pay for, not this exact model.

Wall-mounted indoor unit after installation in a finished room – El Shora work
Outdoor unit on brackets with correct ventilation clearance – El Shora work

Related guides

Common questions about the Midea Xtreme Pro 2.25 HP Cool & Heat Split AC

How big a room does the Midea Xtreme Pro 2.25 HP Cool & Heat Split AC cover?
This capacity (2.25 HP ≈ 18,000 BTU) covers 16 to 21 m² at a 2.8 m ceiling, based on 300 to 400 BTU per cubic metre. On a top floor or a sunny façade treat it as the minimum, and you can check with the AC calculator.

What is the price of the Midea Xtreme Pro 2.25 HP Cool & Heat Split AC today?
EGP 33,389 for the unit including delivery only within our service areas (updated 12 September 2026). Installation, commissioning, warranty activation and after-sales are a separate paid service, written clearly in the quotation before any work. 🎁 Limited-time offer: standard installation is free for wall-mounted units (Carrier and Midea) in 6th of October, Sheikh Zayed, Hadayek October and Hadayek Al-Ahram until 31 December 2026 — offer details.

Is installation free in October and Zayed?
Yes, until 31 December 2026: if your address is in 6th of October, Sheikh Zayed, Hadayek October and Hadayek Al-Ahram, standard installation of this unit is free — 3 m of insulated copper, mounting, pressure test, vacuum, commissioning and warranty activation. Extra pipe length, preparation and chasing are charged as usual, and sales confirm the address on the confirmation call. Details in the offer page.

This model uses R32 — what does that mean?
R32 is the newer generation: higher efficiency, a smaller charge and lower environmental impact, and it needs a technician trained for it because it is mildly flammable. The full comparison is in R32 versus R410A.

Does this unit need a special power supply?
No. It runs on single-phase / 220 V, the normal apartment supply, with no meter change. The run from the meter to the unit and any electrical work are priced separately.

Can I buy the unit and have someone else install it?
Of course; the price covers the unit and delivery only. Keep in mind that installation quality is what actually decides the compressor's life: the nitrogen pressure test, micron vacuum and full insulation are not cosmetic details, and warranty activation happens at commissioning. 🎁 Limited-time offer: standard installation is free for wall-mounted units (Carrier and Midea) in 6th of October, Sheikh Zayed, Hadayek October and Hadayek Al-Ahram until 31 December 2026 — offer details.

We serve your area

Supply, installation and maintenance run from our base in 6th of October, with appointments confirmed before the visit and photo documentation. Among the areas we serve: AC in New Mansoura · AC in Maadi · AC in Obour · AC in Sheikh Zayed · all service areas.

Request a quotation · Contact us · El Shora, Midea dealer

Xtream pro new
33,388.80 LE 33,388.80 LE

  • Brand
  • AC Type
  • Compressor Type
  • Cooling System
  • AC Capacity
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days
🎁 تركيب مجاني لحد 31/12/2026
لو عنوانك في 6 أكتوبر أو الشيخ زايد أو حدائق أكتوبر أو حدائق الأهرام: السعر ده شامل التوصيل والتركيب القياسي (3 متر نحاس بالعزل + تثبيت + اختبار ضغط + فاكيوم + تشغيل). برّه المناطق دي التركيب بمقابل. المبيعات بتأكد العنوان في المكالمة.
تفاصيل العرض
ليه تشتري من الشورى؟
  • ✔ شركة تكييف من 2016 — أكتر من 13,000 مشروع
  • ✔ 27 منطقة خدمة · مخزن في 6 أكتوبر
  • ✔ التركيب والتشغيل وتفعيل الضمان بفنيين الشورى
اعرف الشورى

Specifications

Brand Midea
AC Type High Wall
Compressor Type Inverter
Cooling System Cool & Heat
AC Capacity 2.25 HP