Midea Mission Pro 2.25 HP Cool Only Split AC (code M1SCT-18CRN-Q8): a wall-mounted split air conditioner from Midea rated 2.25 HP ≈ 18,000 BTU/hr, cool only, with a fixed-speed compressor, on R410A refrigerant. Priced at EGP 31,685 including delivery within our service areas, from El Shora, authorized Carrier and Midea distributor in 6th of October.
See all Midea 2.25 HP models, prices and series differences on one page: Midea 2.25 HP air conditioners.
Refrigerant: R410A – the standard refrigerant most widely used in Egypt: any service centre can charge it and parts are available everywhere. How it compares with R32.
Midea Mission Pro 2.25 HP Cool Only Split AC – technical specifications
| Brand | Midea |
| Series | Mission Pro |
| Model code | M1SCT-18CRN-Q8 |
| Unit type | Wall-mounted split |
| Nominal capacity | 2.25 HP ≈ 18,000 BTU/hr |
| Approximate area | 16 – 21 m² at 2.8 m ceiling |
| Operating mode | Cool only |
| Compressor | Fixed speed |
| Refrigerant | R410A |
| Power supply | Single-phase / 220 V |
| Copper sizes | Per the manufacturer catalogue, confirmed on the site survey |
| Warranty | Authorized dealer warranty — duration and terms are stated in the warranty certificate and the quotation |
| Price (delivery only) | EGP 31,685 – updated 12 September 2026 |
Table data comes from our company records and approved engineering reference; pipe sizes are confirmed from the model catalogue before work. Published pipe tables are at the pipe size page.
What does M1SCT-18CRN-Q8 mean?
The code is not random; reading it lets you make sure you are comparing the same model at any seller (per the brand's Egyptian models):
- M1S = the Midea Egypt wall-split prefix
- CR = cooling only
- 18 = cooling capacity in thousands of BTU (18,000 BTU/hr ≈ 2.25 HP)
- N = fixed-speed compressor
How many m² does 2.25 HP cool?
Using our approved heat-load method (length × width × height × a factor of 300 / 350 / 400 BTU/m³ depending on exposure), this capacity covers 16 to 21 m² at a 2.8 m ceiling. The most common choice for living rooms, small halls, mid-size offices and large bedrooms. If the space opens onto a kitchen or reception, size the load on the whole open volume, not one room. Large glazing, a kitchen and the number of occupants raise the load, so confirm with a real calculation: how engineers pick the right AC capacity · what HP and BTU mean · the AC calculator.
Cooling, heating and the compressor
A cooling-only model with no heating mode. If you need winter heating, the cool & heat version of the same capacity is in the comparison below, and the price gap is usually less than a separate heater.
This is a fixed-speed model: cheaper to buy, simpler to maintain, and best suited to intermittent or seasonal use. For long daily use, compare it with the inverter using an electricity-bill calculation.
The Midea Mission Pro series
Mission Pro is Midea's best-selling core series: fixed-speed compressor, R410A refrigerant and a competitive price with dealer warranty. The choice for everyday home use and rental units. Our range has 8 models in this series from 1.5 to 5 HP, and this model sits mid-range in the series. All models are in the Mission Pro category · all Midea prices.
Who should buy this model
The ideal case for this model: use is intermittent or seasonal and the purchase price matters most, together with heating is not needed or another heat source already exists, and the space is 16 to 21 m² with an external wall close by for the pipe route. We say that plainly so you do not pay for a feature you will not use.
Compare M1SCT-18CRN-Q8 before you decide
The table puts this model next to its closest alternatives from our system: the same model in the other operating mode, the inverter or fixed-speed version, the other brand's equivalent, and the other capacities of the same series. Differences in EGP are computed from our current prices.
| Comparison | Model | Price (EGP) | vs M1SCT-18CRN-Q8 |
|---|
| Same model, cool & heat | M1SCT-18HRNF-Q8 | 34,905 | +EGP 3,220 (10%) |
| Inverter version | M1SEFT-18CRDN8F-Q8 (AI Eco Master) | 34,883 | +EGP 3,198 (10%) |
| Carrier equivalent | 53KHEFT18N8-708F (X-Cool New) | 32,853 | +EGP 1,168 (4%) |
| Same series, 1.5 HP cool only | M1SCT-12CRN-Q8 | 20,453 | −EGP 11,232 (35%) |
| Same series, 1.5 HP cool & heat | M1SCT-12HRNF-Q8 | 22,475 | −EGP 9,210 (29%) |
| Same series, 2.25 HP cool & heat | M1SCT-18HRNF-Q8 | 34,905 | +EGP 3,220 (10%) |
| Same series, 3 HP cool only | M1SCT-24CRN-Q8 | 38,845 | +EGP 7,160 (23%) |
The cheapest Midea 2.25 HP wall-mounted split in our range is M1SEFT-18CRN8F-Q8 at EGP 30,357; this model costs EGP 1,328 more for the higher series.
Is this a good price?
A simple measure that compares prices fairly: divide the unit price by its rated capacity. M1SCT-18CRN-Q8 costs EGP 31,685 for 18,000 BTU, which means 1,760 EGP per 1,000 BTU.
| This model | EGP 1,760 per 1,000 BTU |
| Average across our wall-mounted split range (44 models) | EGP 1,971 |
| Cheapest model of the same type | EGP 1,570 |
| Most expensive model of the same type | EGP 2,652 |
This model is among the better value in its type with us: its cost per unit of cooling is 11% below average, ranking 12 of 44 from cheapest to most expensive per BTU.
Installation: what actually matters
A wall split is installed the same day in a ready space: the indoor unit at 2.1 to 2.3 m height away from direct sun, the outdoor unit on brackets with enough ventilation clearance and a drain route with correct slope.
Our installation follows a written protocol: copper sizes matching the catalogue, full Armaflex insulation, a nitrogen pressure test and micron vacuum before charging, a correct drain slope, and photos of each stage on our system. That, not the unit itself, is what decides compressor life. Details in AC installation · AC maintenance.
The unit price includes delivery only within our service areas; installation, commissioning, warranty activation and after-sales service are a separate paid service, written clearly in the quotation together with any extra pipe length, preparation, chasing or scaffolding the site needs.
From our real installations
Photos from El Shora's work on the same type of unit; they show the installation standard you pay for, not this exact model.
Worth reading before you buy
What customers ask about the Midea Mission Pro 2.25 HP Cool Only Split AC
How big a room does the Midea Mission Pro 2.25 HP Cool Only Split AC cover?
This capacity (2.25 HP ≈ 18,000 BTU) covers 16 to 21 m² at a 2.8 m ceiling, based on 300 to 400 BTU per cubic metre. On a top floor or a sunny façade treat it as the minimum, and you can check with the AC calculator.
What is the price of the Midea Mission Pro 2.25 HP Cool Only Split AC today?
EGP 31,685 for the unit including delivery only within our service areas (updated 12 September 2026). Installation, commissioning, warranty activation and after-sales are a separate paid service, written clearly in the quotation before any work.
Where do you deliver and how fast?
Delivery is included within our service areas in Cairo, Giza, the new cities and the coast. Because the warehouse is in 6th of October, deliveries to October, Zayed and nearby areas are scheduled faster, and in every case we confirm the appointment before dispatch.
Is the unit genuine and invoiced?
Yes. El Shora is an authorized Carrier and Midea distributor; the unit is handed over with a registered serial number, a warranty certificate and an official invoice in your name. That is what keeps the warranty valid if you need it, and it is the difference from buying on the parallel market.
Does this unit heat?
No, this is a cool-only model. The cool & heat version of the same model is M1SCT-18HRNF-Q8, a difference of EGP 3,220, listed in the comparison table above.
Should I buy this fixed-speed model or an inverter?
For intermittent or seasonal use, the fixed-speed model is cheaper to buy and simpler to service. If the unit will run long hours every day, compare it with the inverter (M1SEFT-18CRDN8F-Q8 at EGP 34,883) because the consumption gap pays back the price difference over time. The maths is in inverter or fixed-speed.
Delivery and installation in your area
Supply, installation and maintenance run from our base in 6th of October, with appointments confirmed before the visit and photo documentation. Among the areas we serve: AC in Obour · AC in Sheikh Zayed · AC in Nasr City · AC in Alexandria · all service areas.
Request a quotation · Contact us · El Shora, Midea dealer
