Model M1SABT-36HRDNF-Q8 is the Midea Mission Inverter 5 HP Cool & Heat Split AC: a wall-mounted split unit, cool & heat, with an inverter compressor, rated 36,000 BTU/hr (5 HP) on R410A. The price is EGP 83,510 for the unit including delivery only within El Shora's service areas; El Shora is the authorized Carrier and Midea distributor.
See all Midea 5 HP models, prices and series differences on one page: Midea 5 HP air conditioners.
Refrigerant: R410A – the standard refrigerant most widely used in Egypt: any service centre can charge it and parts are available everywhere. How it compares with R32.
Midea Mission Inverter 5 HP Cool & Heat Split AC – full specifications
| Brand | Midea |
| Series | Mission Inverter |
| Model code | M1SABT-36HRDNF-Q8 |
| Unit type | Wall-mounted split |
| Nominal capacity | 5 HP ≈ 36,000 BTU/hr |
| Approximate area | 32 – 43 m² at 2.8 m ceiling |
| Operating mode | Cool & heat (heat pump) |
| Compressor | DC inverter – tropical twin-rotary inverter, GMCC Toshiba |
| Refrigerant | R410A |
| Power supply | Single-phase / 220 V |
| Refrigerant pipe sizes (manufacturer catalogue) | gas 5/8" × liquid 3/8" |
| Max pipe run / height difference | 50 m / 25 m |
| Warranty | Authorized dealer warranty — duration and terms are stated in the warranty certificate and the quotation |
| Price (delivery only) | EGP 83,510 – updated 12 September 2026 |
Pipe sizes and maximum run come from the manufacturer catalogue for this exact model; the rest of the table is from our company data. The full table for every model is at the refrigerant pipe size table.
Model code M1SABT-36HRDNF-Q8 explained
The code is not random; reading it lets you make sure you are comparing the same model at any seller (per the brand's Egyptian models):
- M1S = the Midea Egypt wall-split prefix
- HR = heat & cool
- 36 = cooling capacity in thousands of BTU (36,000 BTU/hr ≈ 5 HP)
- DN = DC inverter compressor
How much space does 5 HP cover?
Using our approved heat-load method (length × width × height × a factor of 300 / 350 / 400 BTU/m³ depending on exposure), this capacity covers 32 to 43 m² at a 2.8 m ceiling. A large-space capacity: wide halls, shops, small restaurants, pharmacies and training rooms. With loads like these you must count fresh air and occupants, not just the dimensions. Large glazing, a kitchen and the number of occupants raise the load, so confirm with a real calculation: how engineers pick the right AC capacity · what HP and BTU mean · the AC calculator.
Operating mode and compressor
Besides cooling, this model heats in winter (heat pump): one unit for both seasons instead of buying a separate heater, and at much lower consumption than a heater.
With an inverter compressor the unit does not keep cutting out and restarting; it holds a low speed that keeps the temperature stable. That narrows the gap between the temperature you set and the one you feel, and keeps it quieter at night.
The Midea Mission Inverter series
Mission Inverter combines the Mission price level with inverter technology, R410A, cool & heat, in 4 and 5 HP for large spaces. Our range has 3 models in this series from 2.25 to 5 HP, and this model is the largest capacity in the series. All models are in the Mission Inverter category · all Midea prices.
Who is this model for?
This model makes sense if the unit will run long hours every day (a bedroom all night or an office all day), and the space is 32 to 43 m² with an external wall close by for the pipe route. If your situation is different, the comparison table below shows the closest alternative with its exact price difference.
M1SABT-36HRDNF-Q8 against the alternatives we stock
Before choosing, look at these numbers: each row is a real alternative in our range with its price difference from this model in EGP and percent. Click a code to open that model's page.
| Comparison | Model | Price (EGP) | vs M1SABT-36HRDNF-Q8 |
|---|
| Fixed-speed version | M1SFT-36HRNF-Q8 (Mission Pro) | 74,480 | −EGP 9,030 (11%) |
| Carrier equivalent | 53QHET36DN-708F (Optimax Inverter) | 91,400 | +EGP 7,890 (9%) |
| Same series, 2.25 HP cool only | M1SCT-18CRDNF-Q8 | 32,883 | −EGP 50,627 (61%) |
| Same series, 4 HP cool & heat | M1SABT-30HRDNF-Q8 | 72,665 | −EGP 10,845 (13%) |
The cheapest Midea 5 HP wall-mounted split in our range is M1SFT-36HRNF-Q8 at EGP 74,480; this model costs EGP 9,030 more for the inverter.
Cost per 1,000 BTU
A simple measure that compares prices fairly: divide the unit price by its rated capacity. M1SABT-36HRDNF-Q8 costs EGP 83,510 for 36,000 BTU, which means 2,320 EGP per 1,000 BTU.
| This model | EGP 2,320 per 1,000 BTU |
| Average across our wall-mounted split range (36 models) | EGP 2,023 |
| Cheapest model of the same type | EGP 1,600 |
| Most expensive model of the same type | EGP 2,652 |
Cost per unit of cooling here is 15% above average, which is expected because you are paying for the inverter and heating and the series level. If that number matters most, the comparison table above has the cheaper options.
Installation and execution with El Shora
Installing a wall split takes one day if the space is ready. What matters: nothing blocking the indoor unit's airflow, an outdoor unit in a ventilated rather than boxed-in position, and a drain running outwards with slope and no back-fall.
What decides a unit's life is not the brand alone, it is the installation: copper at the right diameter with no extra joints, full insulation on both lines, a dry-nitrogen test and a micron vacuum before the refrigerant is released, and a correct drain slope. Every step is photographed and logged on our system under the project name. Details in AC installation · AC maintenance.
The unit price includes delivery only within our service areas; installation, commissioning, warranty activation and after-sales service are a separate paid service, written clearly in the quotation together with any extra pipe length, preparation, chasing or scaffolding the site needs. 🎁 Limited-time offer: standard installation is free for wall-mounted units (Carrier and Midea) in 6th of October, Sheikh Zayed, Hadayek October and Hadayek Al-Ahram until 31 December 2026 — offer details.
From our real installations
Photos from El Shora's work on the same type of unit; they show the installation standard you pay for, not this exact model.
More to read before deciding
FAQ about the Midea Mission Inverter 5 HP Cool & Heat Split AC
How big a room does the Midea Mission Inverter 5 HP Cool & Heat Split AC cover?
This capacity (5 HP ≈ 36,000 BTU) covers 32 to 43 m² at a 2.8 m ceiling, based on 300 to 400 BTU per cubic metre. On a top floor or a sunny façade treat it as the minimum, and you can check with the AC calculator.
What is the price of the Midea Mission Inverter 5 HP Cool & Heat Split AC today?
EGP 83,510 for the unit including delivery only within our service areas (updated 12 September 2026). Installation, commissioning, warranty activation and after-sales are a separate paid service, written clearly in the quotation before any work. 🎁 Limited-time offer: standard installation is free for wall-mounted units (Carrier and Midea) in 6th of October, Sheikh Zayed, Hadayek October and Hadayek Al-Ahram until 31 December 2026 — offer details.
Is installation free in October and Zayed?
Yes, until 31 December 2026: if your address is in 6th of October, Sheikh Zayed, Hadayek October and Hadayek Al-Ahram, standard installation of this unit is free — 3 m of insulated copper, mounting, pressure test, vacuum, commissioning and warranty activation. Extra pipe length, preparation and chasing are charged as usual, and sales confirm the address on the confirmation call. Details in the offer page.
How much does the inverter actually save?
The inverter saves more the longer the unit runs continuously, because it holds a low speed instead of start-stop cycles. In a bedroom that runs all night or an office that runs all day, the difference shows in the first summer. The closest fixed-speed version is M1SFT-36HRNF-Q8 at EGP 74,480. Details in inverter or fixed-speed.
What does the code M1SABT-36HRDNF-Q8 mean?
The code summarises the model: the Midea prefix M1S, HR = cool & heat, the number 36 = 36,000 BTU (5 HP), and DN = inverter. Details in the code section above.
This model uses R410A — what does that mean?
R410A is the standard refrigerant widely used in Egypt: any service centre can charge it and every workshop has the tools. The full comparison is in R32 versus R410A.
Where we deliver and install
Supply, installation and maintenance run from our base in 6th of October, with appointments confirmed before the visit and photo documentation. Among the areas we serve: AC in North Coast · AC in Haram & Faisal · AC in Rehab · AC in New Alamein · all service areas.
Request a quotation · Contact us · El Shora, Midea dealer