Looking for the Midea Mission Pro 3 HP Cool & Heat Split AC? This is model M1SCT-24HRNF-Q8 from the Mission Pro series: 24,000 BTU (3 HP), cool & heat, with a fixed-speed compressor, on R410A, at EGP 41,760 for the unit including delivery. El Shora is the authorized Midea dealer, with our base and warehouse in 6th of October.
See all Midea 3 HP models, prices and series differences on one page: Midea 3 HP air conditioners.
Refrigerant: R410A – the standard refrigerant most widely used in Egypt: any service centre can charge it and parts are available everywhere. How it compares with R32.
Midea Mission Pro 3 HP Cool & Heat Split AC – technical data
| Brand | Midea |
| Series | Mission Pro |
| Model code | M1SCT-24HRNF-Q8 |
| Unit type | Wall-mounted split |
| Nominal capacity | 3 HP ≈ 24,000 BTU/hr |
| Approximate area | 21 – 29 m² at 2.8 m ceiling |
| Operating mode | Cool & heat (heat pump) |
| Compressor | Fixed speed |
| Refrigerant | R410A |
| Power supply | Single-phase / 220 V |
| Copper sizes (engineering reference) | 3/8 × 5/8" – checked against the model catalogue |
| Warranty | Authorized dealer warranty — duration and terms are stated in the warranty certificate and the quotation |
| Price (delivery only) | EGP 41,760 – updated 12 September 2026 |
Table data comes from our company records and approved engineering reference; pipe sizes are confirmed from the model catalogue before work. Published pipe tables are at the pipe size page.
How to read the code M1SCT-24HRNF-Q8
The code is not random; reading it lets you make sure you are comparing the same model at any seller (per the brand's Egyptian models):
- M1S = the Midea Egypt wall-split prefix
- HR = heat & cool
- 24 = cooling capacity in thousands of BTU (24,000 BTU/hr ≈ 3 HP)
- N = fixed-speed compressor
The right space for 3 HP
Using our approved heat-load method (length × width × height × a factor of 300 / 350 / 400 BTU/m³ depending on exposure), this capacity covers 21 to 29 m² at a 2.8 m ceiling. The capacity for halls, large living rooms, offices and small shops. In a long or partitioned space, air distribution matters more than the capacity figure, and that is decided on the site survey. Large glazing, a kitchen and the number of occupants raise the load, so confirm with a real calculation: how engineers pick the right AC capacity · what HP and BTU mean · the AC calculator.
What makes the difference in operation
This model is cool & heat, so in winter it reverses the cycle and moves heat from outside in rather than generating it like a heater. That is why it draws far less power for the same feeling of warmth.
Fixed-speed compressor: it runs at full capacity and stops when the set temperature is reached. It costs less than the inverter at the same capacity and is simpler to service, but consumption is higher if the unit runs many hours a day.
The Midea Mission Pro series
Midea's best-selling series, fixed-speed on R410A. A new unit with dealer warranty and an official invoice at the lowest possible price, which makes it the first choice for apartments and rentals. Our range has 8 models in this series from 1.5 to 5 HP, and this model sits mid-range in the series. All models are in the Mission Pro category · all Midea prices.
When to choose it
You would choose this model when you want winter heating from the same unit without a separate heater. And the space is 21 to 29 m² with an external wall close by for the pipe route. If either of those does not apply to you, look at the alternatives in the table below before paying.
Why pay more? M1SCT-24HRNF-Q8 compared
Instead of comparing across websites, here are all the close alternatives we stock in one table at today's prices: the other mode, the other compressor, the other brand, and the higher and lower capacities in the same series.
| Comparison | Model | Price (EGP) | vs M1SCT-24HRNF-Q8 |
|---|
| Same model, cool only | M1SCT-24CRN-Q8 | 38,845 | −EGP 2,915 (7%) |
| Inverter version | M1SEFT-24HRDN8F-Q8 (AI Eco Master) | 42,906 | +EGP 1,146 (3%) |
| Carrier equivalent | 53QHEFT24N8-708F (X-Cool New) | 42,036 | +EGP 276 (1%) |
| Same series, 1.5 HP cool only | M1SCT-12CRN-Q8 | 20,453 | −EGP 21,307 (51%) |
| Same series, 1.5 HP cool & heat | M1SCT-12HRNF-Q8 | 22,475 | −EGP 19,285 (46%) |
| Same series, 2.25 HP cool only | M1SCT-18CRN-Q8 | 31,685 | −EGP 10,075 (24%) |
| Same series, 2.25 HP cool & heat | M1SCT-18HRNF-Q8 | 34,905 | −EGP 6,855 (16%) |
The cheapest Midea 3 HP wall-mounted split in our range is M1SEFT-24CRN8F-Q8 at EGP 37,677; this model costs EGP 4,083 more for heating.
Price against capacity
A simple measure that compares prices fairly: divide the unit price by its rated capacity. M1SCT-24HRNF-Q8 costs EGP 41,760 for 24,000 BTU, which means 1,740 EGP per 1,000 BTU.
| This model | EGP 1,740 per 1,000 BTU |
| Average across our wall-mounted split range (44 models) | EGP 1,971 |
| Cheapest model of the same type | EGP 1,570 |
| Most expensive model of the same type | EGP 2,652 |
This model is among the better value in its type with us: its cost per unit of cooling is 12% below average, ranking 10 of 44 from cheapest to most expensive per BTU.
How we carry out the installation
With a wall split, the position of both units affects cooling more than anything else: the indoor unit facing the length of the room rather than a closed corner, the outdoor unit in open air away from sun reflected off a facing wall, and the shortest practical pipe run between them.
We work to approved specifications and fixed steps, not improvisation: South African or Swedish copper in the right sizes, full Armaflex insulation on both lines, a dry-nitrogen pressure test then a micron vacuum before charging, a correct drain slope that prevents dripping, and photo documentation of every stage on our system. Details in AC installation · AC maintenance.
The unit price includes delivery only within our service areas; installation, commissioning, warranty activation and after-sales service are a separate paid service, written clearly in the quotation together with any extra pipe length, preparation, chasing or scaffolding the site needs.
From our real installations
Photos from El Shora's work on the same type of unit; they show the installation standard you pay for, not this exact model.
Related guides
Common questions about the Midea Mission Pro 3 HP Cool & Heat Split AC
How big a room does the Midea Mission Pro 3 HP Cool & Heat Split AC cover?
This capacity (3 HP ≈ 24,000 BTU) covers 21 to 29 m² at a 2.8 m ceiling, based on 300 to 400 BTU per cubic metre. On a top floor or a sunny façade treat it as the minimum, and you can check with the AC calculator.
What is the price of the Midea Mission Pro 3 HP Cool & Heat Split AC today?
EGP 41,760 for the unit including delivery only within our service areas (updated 12 September 2026). Installation, commissioning, warranty activation and after-sales are a separate paid service, written clearly in the quotation before any work.
This model uses R410A — what does that mean?
R410A is the standard refrigerant widely used in Egypt: any service centre can charge it and every workshop has the tools. The full comparison is in R32 versus R410A.
Does this unit need a special power supply?
No. It runs on single-phase / 220 V, the normal apartment supply, with no meter change. The run from the meter to the unit and any electrical work are priced separately.
Can I buy the unit and have someone else install it?
Of course; the price covers the unit and delivery only. Keep in mind that installation quality is what actually decides the compressor's life: the nitrogen pressure test, micron vacuum and full insulation are not cosmetic details, and warranty activation happens at commissioning.
Where do you deliver and how fast?
Delivery is included within our service areas in Cairo, Giza, the new cities and the coast. Because the warehouse is in 6th of October, deliveries to October, Zayed and nearby areas are scheduled faster, and in every case we confirm the appointment before dispatch.
We serve your area
Supply, installation and maintenance run from our base in 6th of October, with appointments confirmed before the visit and photo documentation. Among the areas we serve: AC in New Mansoura · AC in Maadi · AC in Obour · AC in Sheikh Zayed · all service areas.
Request a quotation · Contact us · El Shora, Midea dealer
