Midea AI Eco Master 3 HP Cool & Heat Inverter Split AC (code M1SEFT-24HRDN8F-Q8): a wall-mounted split air conditioner from Midea rated 3 HP ≈ 24,000 BTU/hr, cool & heat, with an inverter compressor, on R32 refrigerant. Priced at EGP 42,906 including delivery within our service areas, from El Shora, authorized Carrier and Midea distributor in 6th of October.
See all Midea 3 HP models, prices and series differences on one page: Midea 3 HP air conditioners.
🧊 Refrigerant: R32 – the newest generation of refrigerant: higher cooling efficiency, lower power consumption and lower environmental impact. Learn the difference between R32 and R410A.
Midea AI Eco Master 3 HP Cool & Heat Inverter Split AC – technical specifications
| Brand | Midea |
| Series | AI Eco Master |
| Model code | M1SEFT-24HRDN8F-Q8 |
| Unit type | Wall-mounted split |
| Nominal capacity | 3 HP ≈ 24,000 BTU/hr |
| Approximate area | 21 – 29 m² at 2.8 m ceiling |
| Operating mode | Cool & heat (heat pump) |
| Compressor | DC inverter |
| Refrigerant | R32 |
| Power supply | Single-phase / 220 V |
| Copper sizes (engineering reference) | 3/8 × 5/8" – checked against the model catalogue |
| Warranty | Authorized dealer warranty — duration and terms are stated in the warranty certificate and the quotation |
| Price (delivery only) | EGP 42,906 – updated 12 September 2026 |
Table data comes from our company records and approved engineering reference; pipe sizes are confirmed from the model catalogue before work. Published pipe tables are at the pipe size page.
What does M1SEFT-24HRDN8F-Q8 mean?
The code is not random; reading it lets you make sure you are comparing the same model at any seller (per the brand's Egyptian models):
- M1S = the Midea Egypt wall-split prefix
- HR = heat & cool
- 24 = cooling capacity in thousands of BTU (24,000 BTU/hr ≈ 3 HP)
- DN = DC inverter compressor
How many m² does 3 HP cool?
Using our approved heat-load method (length × width × height × a factor of 300 / 350 / 400 BTU/m³ depending on exposure), this capacity covers 21 to 29 m² at a 2.8 m ceiling. The capacity for halls, large living rooms, offices and small shops. In a long or partitioned space, air distribution matters more than the capacity figure, and that is decided on the site survey. Large glazing, a kitchen and the number of occupants raise the load, so confirm with a real calculation: how engineers pick the right AC capacity · what HP and BTU mean · the AC calculator.
Cooling, heating and the compressor
Cool & heat (heat pump): it cools in summer and heats in winter from the same unit, far cheaper to run than electric heaters. Heating efficiency drops on very cold nights but is more than enough for an Egyptian winter.
The inverter here controls compressor speed gradually rather than on/off, which reduces temperature swings and the start-up surge on the mains. Better suited to daily, long use.
The Midea AI Eco Master series
Midea's core wall-split inverter, on R32 with AI Eco Master technology. The natural choice for a bedroom that runs all night or an office that runs all day. Our range has 6 models in this series from 1.5 to 3 HP, and this model is the largest capacity in the series. All models are in the AI Eco Master category · all Midea prices.
Who should buy this model
The ideal case for this model: the unit will run long hours every day (a bedroom all night or an office all day), together with you want winter heating from the same unit without a separate heater, and the space is 21 to 29 m² with an external wall close by for the pipe route. We say that plainly so you do not pay for a feature you will not use.
Compare M1SEFT-24HRDN8F-Q8 before you decide
The table puts this model next to its closest alternatives from our system: the same model in the other operating mode, the inverter or fixed-speed version, the other brand's equivalent, and the other capacities of the same series. Differences in EGP are computed from our current prices.
| Comparison | Model | Price (EGP) | vs M1SEFT-24HRDN8F-Q8 |
|---|
| Same model, cool only | M1SEFT-24CRDN8F-Q8 | 39,654 | −EGP 3,252 (8%) |
| Fixed-speed version | M1SEFT-24HRN8F-Q8 (Xtreme) | 40,451 | −EGP 2,455 (6%) |
| Carrier equivalent | 53QHEFT24DN8-708F (X-Cool Inverter) | 47,465 | +EGP 4,559 (11%) |
| Same series, 1.5 HP cool only | M1SEFT-12CRDN8F-Q8 | 23,458 | −EGP 19,449 (45%) |
| Same series, 1.5 HP cool & heat | M1SEFT-12HRDN8F-Q8 | 25,638 | −EGP 17,268 (40%) |
| Same series, 2.25 HP cool only | M1SEFT-18CRDN8F-Q8 | 34,883 | −EGP 8,023 (19%) |
| Same series, 2.25 HP cool & heat | M1SEFT-18HRDN8F-Q8 | 37,764 | −EGP 5,142 (12%) |
The cheapest Midea 3 HP wall-mounted split in our range is M1SEFT-24CRN8F-Q8 at EGP 37,677; this model costs EGP 5,229 more for the inverter.
Is this a good price?
A simple measure that compares prices fairly: divide the unit price by its rated capacity. M1SEFT-24HRDN8F-Q8 costs EGP 42,906 for 24,000 BTU, which means 1,788 EGP per 1,000 BTU.
| This model | EGP 1,788 per 1,000 BTU |
| Average across our wall-mounted split range (44 models) | EGP 1,971 |
| Cheapest model of the same type | EGP 1,570 |
| Most expensive model of the same type | EGP 2,652 |
This model is among the better value in its type with us: its cost per unit of cooling is 9% below average, ranking 13 of 44 from cheapest to most expensive per BTU.
Installation: what actually matters
A wall split is installed the same day in a ready space: the indoor unit at 2.1 to 2.3 m height away from direct sun, the outdoor unit on brackets with enough ventilation clearance and a drain route with correct slope.
Our installation follows a written protocol: copper sizes matching the catalogue, full Armaflex insulation, a nitrogen pressure test and micron vacuum before charging, a correct drain slope, and photos of each stage on our system. That, not the unit itself, is what decides compressor life. Details in AC installation · AC maintenance.
The unit price includes delivery only within our service areas; installation, commissioning, warranty activation and after-sales service are a separate paid service, written clearly in the quotation together with any extra pipe length, preparation, chasing or scaffolding the site needs.
From our real installations
Photos from El Shora's work on the same type of unit; they show the installation standard you pay for, not this exact model.
Worth reading before you buy
What customers ask about the Midea AI Eco Master 3 HP Cool & Heat Inverter Split AC
How big a room does the Midea AI Eco Master 3 HP Cool & Heat Inverter Split AC cover?
This capacity (3 HP ≈ 24,000 BTU) covers 21 to 29 m² at a 2.8 m ceiling, based on 300 to 400 BTU per cubic metre. On a top floor or a sunny façade treat it as the minimum, and you can check with the AC calculator.
What is the price of the Midea AI Eco Master 3 HP Cool & Heat Inverter Split AC today?
EGP 42,906 for the unit including delivery only within our service areas (updated 12 September 2026). Installation, commissioning, warranty activation and after-sales are a separate paid service, written clearly in the quotation before any work.
Is the unit genuine and invoiced?
Yes. El Shora is an authorized Carrier and Midea distributor; the unit is handed over with a registered serial number, a warranty certificate and an official invoice in your name. That is what keeps the warranty valid if you need it, and it is the difference from buying on the parallel market.
Does it really heat in winter?
Yes, this is a cool & heat (heat pump) model that heats from the same unit at far lower consumption than an electric heater. Heating efficiency drops on very cold nights but is enough for an Egyptian winter.
How much does the inverter actually save?
The inverter saves more the longer the unit runs continuously, because it holds a low speed instead of start-stop cycles. In a bedroom that runs all night or an office that runs all day, the difference shows in the first summer. The closest fixed-speed version is M1SEFT-24HRN8F-Q8 at EGP 40,451. Details in inverter or fixed-speed.
What does the code M1SEFT-24HRDN8F-Q8 mean?
The code summarises the model: the Midea prefix M1S, HR = cool & heat, the number 24 = 24,000 BTU (3 HP), and DN = inverter. Details in the code section above.
Delivery and installation in your area
Supply, installation and maintenance run from our base in 6th of October, with appointments confirmed before the visit and photo documentation. Among the areas we serve: AC in Hadayek Al-Ahram · AC in Fifth Settlement · AC in Alexandria · AC in New Zayed · all service areas.
Request a quotation · Contact us · El Shora, Midea dealer
