Looking for the Midea AI Eco Master 1.5 HP Cool & Heat Inverter Split AC? This is model M1SEFT-12HRDN8F-Q8 from the AI Eco Master series: 12,000 BTU (1.5 HP), cool & heat, with an inverter compressor, on R32, at EGP 25,638 for the unit including delivery. El Shora is the authorized Midea dealer, with our base and warehouse in 6th of October.
See all Midea 1.5 HP models, prices and series differences on one page: Midea 1.5 HP air conditioners.
🧊 Refrigerant: R32 – the newest generation of refrigerant: higher cooling efficiency, lower power consumption and lower environmental impact. Learn the difference between R32 and R410A.
Midea AI Eco Master 1.5 HP Cool & Heat Inverter Split AC – technical data
| Brand | Midea |
| Series | AI Eco Master |
| Model code | M1SEFT-12HRDN8F-Q8 |
| Unit type | Wall-mounted split |
| Nominal capacity | 1.5 HP ≈ 12,000 BTU/hr |
| Approximate area | 11 – 14 m² at 2.8 m ceiling |
| Operating mode | Cool & heat (heat pump) |
| Compressor | DC inverter |
| Refrigerant | R32 |
| Power supply | Single-phase / 220 V |
| Copper sizes (engineering reference) | 1/4 × 3/8" – checked against the model catalogue |
| Warranty | Authorized dealer warranty — duration and terms are stated in the warranty certificate and the quotation |
| Price (delivery only) | EGP 25,638 – updated 12 September 2026 |
Table data comes from our company records and approved engineering reference; pipe sizes are confirmed from the model catalogue before work. Published pipe tables are at the pipe size page.
How to read the code M1SEFT-12HRDN8F-Q8
The code is not random; reading it lets you make sure you are comparing the same model at any seller (per the brand's Egyptian models):
- M1S = the Midea Egypt wall-split prefix
- HR = heat & cool
- 12 = cooling capacity in thousands of BTU (12,000 BTU/hr ≈ 1.5 HP)
- DN = DC inverter compressor
The right space for 1.5 HP
Using our approved heat-load method (length × width × height × a factor of 300 / 350 / 400 BTU/m³ depending on exposure), this capacity covers 11 to 14 m² at a 2.8 m ceiling. The typical home for this capacity is bedrooms, home offices and small rooms. A top floor or a west façade means you should treat it as the minimum area, not the maximum. Large glazing, a kitchen and the number of occupants raise the load, so confirm with a real calculation: how engineers pick the right AC capacity · what HP and BTU mean · the AC calculator.
What makes the difference in operation
This model is cool & heat, so in winter it reverses the cycle and moves heat from outside in rather than generating it like a heater. That is why it draws far less power for the same feeling of warmth.
Inverter compressor: it starts at high capacity until the set temperature is reached, then slows down instead of stopping and restarting. The result is steadier cooling, less noise and lower consumption over long runs.
The Midea AI Eco Master series
Midea's core wall-split inverter, on R32 with AI Eco Master technology. The natural choice for a bedroom that runs all night or an office that runs all day. Our range has 6 models in this series from 1.5 to 3 HP, and this model is the smallest capacity in the series. All models are in the AI Eco Master category · all Midea prices.
When to choose it
You would choose this model when you want winter heating from the same unit without a separate heater. And the space is 11 to 14 m² with an external wall close by for the pipe route. If either of those does not apply to you, look at the alternatives in the table below before paying.
Why pay more? M1SEFT-12HRDN8F-Q8 compared
Instead of comparing across websites, here are all the close alternatives we stock in one table at today's prices: the other mode, the other compressor, the other brand, and the higher and lower capacities in the same series.
| Comparison | Model | Price (EGP) | vs M1SEFT-12HRDN8F-Q8 |
|---|
| Same model, cool only | M1SEFT-12CRDN8F-Q8 | 23,458 | −EGP 2,181 (9%) |
| Fixed-speed version | M1SEFT-12HRN8F-Q8 (Xtreme) | 22,012 | −EGP 3,627 (14%) |
| Carrier equivalent | 53QHEFT12DN8-708F (X-Cool Inverter) | 28,838 | +EGP 3,200 (12%) |
| Same series, 1.5 HP cool only | M1SEFT-12CRDN8F-Q8 | 23,458 | −EGP 2,181 (9%) |
| Same series, 2.25 HP cool only | M1SEFT-18CRDN8F-Q8 | 34,883 | +EGP 9,245 (36%) |
| Same series, 2.25 HP cool & heat | M1SEFT-18HRDN8F-Q8 | 37,764 | +EGP 12,126 (47%) |
| Same series, 3 HP cool only | M1SEFT-24CRDN8F-Q8 | 39,654 | +EGP 14,015 (55%) |
The cheapest Midea 1.5 HP wall-mounted split in our range is M1SEFT-12CRN8F-Q8 at EGP 19,814; this model costs EGP 5,825 more for the inverter.
Price against capacity
A simple measure that compares prices fairly: divide the unit price by its rated capacity. M1SEFT-12HRDN8F-Q8 costs EGP 25,638 for 12,000 BTU, which means 2,137 EGP per 1,000 BTU.
| This model | EGP 2,137 per 1,000 BTU |
| Average across our wall-mounted split range (44 models) | EGP 1,971 |
| Cheapest model of the same type | EGP 1,570 |
| Most expensive model of the same type | EGP 2,652 |
Cost per unit of cooling here is 8% above average, which is expected because you are paying for the inverter and heating and the series level. If that number matters most, the comparison table above has the cheaper options.
How we carry out the installation
With a wall split, the position of both units affects cooling more than anything else: the indoor unit facing the length of the room rather than a closed corner, the outdoor unit in open air away from sun reflected off a facing wall, and the shortest practical pipe run between them.
We work to approved specifications and fixed steps, not improvisation: South African or Swedish copper in the right sizes, full Armaflex insulation on both lines, a dry-nitrogen pressure test then a micron vacuum before charging, a correct drain slope that prevents dripping, and photo documentation of every stage on our system. Details in AC installation · AC maintenance.
The unit price includes delivery only within our service areas; installation, commissioning, warranty activation and after-sales service are a separate paid service, written clearly in the quotation together with any extra pipe length, preparation, chasing or scaffolding the site needs.
From our real installations
Photos from El Shora's work on the same type of unit; they show the installation standard you pay for, not this exact model.
Related guides
Common questions about the Midea AI Eco Master 1.5 HP Cool & Heat Inverter Split AC
How big a room does the Midea AI Eco Master 1.5 HP Cool & Heat Inverter Split AC cover?
This capacity (1.5 HP ≈ 12,000 BTU) covers 11 to 14 m² at a 2.8 m ceiling, based on 300 to 400 BTU per cubic metre. On a top floor or a sunny façade treat it as the minimum, and you can check with the AC calculator.
What is the price of the Midea AI Eco Master 1.5 HP Cool & Heat Inverter Split AC today?
EGP 25,638 for the unit including delivery only within our service areas (updated 12 September 2026). Installation, commissioning, warranty activation and after-sales are a separate paid service, written clearly in the quotation before any work.
This model uses R32 — what does that mean?
R32 is the newer generation: higher efficiency, a smaller charge and lower environmental impact, and it needs a technician trained for it because it is mildly flammable. The full comparison is in R32 versus R410A.
Does this unit need a special power supply?
No. It runs on single-phase / 220 V, the normal apartment supply, with no meter change. The run from the meter to the unit and any electrical work are priced separately.
Can I buy the unit and have someone else install it?
Of course; the price covers the unit and delivery only. Keep in mind that installation quality is what actually decides the compressor's life: the nitrogen pressure test, micron vacuum and full insulation are not cosmetic details, and warranty activation happens at commissioning.
Where do you deliver and how fast?
Delivery is included within our service areas in Cairo, Giza, the new cities and the coast. Because the warehouse is in 6th of October, deliveries to October, Zayed and nearby areas are scheduled faster, and in every case we confirm the appointment before dispatch.
We serve your area
Supply, installation and maintenance run from our base in 6th of October, with appointments confirmed before the visit and photo documentation. Among the areas we serve: AC in New Mansoura · AC in Maadi · AC in Obour · AC in Sheikh Zayed · all service areas.
Request a quotation · Contact us · El Shora, Midea dealer
